KBT
TKMAX: 46000 Nm
These couplings are for use in machinery where a torsionally rigid torque is required, especially on frequently varying loads and speeds.
- Steel coupling with special tooth pattern
- Torque transmission via internal geared sleeve and external geared hubs
- Replacement of the brake disc or the seals without moving any equipment
- High temperature resistance
- Low wear
- Arrangement of the brake drum on the gear side to allow the brake torque to be maintained when the motor is disengaged
- Vast selection of coupling sizes and brake disc diameters
- Coupling hubs finish bored and keywayed acc. to DIN 6885
- Coupling hubs unbored
- Coupling hubs pilot bored
- Coupling dynamically balanced according to ISO 21940 Grade: G 2.5; G 6.3
- Hubs in special dimensions
- Hubs in special material
- Test certificate DIN EN 10204-3.1
Additional PRODUCTS
The Hub with Brake Disc Type N + NX is appropriate for all drives, where the brake is not located between motor and gearbox, like brake installation on the second gear box shaft or at the motor end shaft.
The Hub with Brake Disc Type N + NX is appropriate for all drives, where the brake is not located between motor and gearbox, like brake installation on the second gear box shaft or at the motor end shaft.
For many years a seawaterproof version of the SFB series has been used successfully on winch motors in ship building and as a safety, service or holding brake in wharf crane installations.