DELLNER WIND SOLUTIONS

JHS-YBA-16-90

JHS-YBA-16-90

Braking Force:
Up to 188 kN

Hydraulic active yaw brake caliper

  • Hydraulically applied
  • Air gap between brake pad and disc up to 2mm per side
  • Special epoxy resin pad with GFK carrier plate
  • Tight fitting between brake pad and caliper
  • Drain ports for oil leakage, preventing oil from contaminating brake disc
  • Min / Max working temperature -40°C / + 60°C
  • Complete piped supports for one or more calipers
  • Brake Disc
  • Optional Brake Pad material
  • Brake pad with wear indicators

Additional PRODUCTS

Model Number: B4070

N

The Hub with Brake Disc Type N + NX is appropriate for all drives, where the brake is not located between motor and gearbox, like brake installation on the second gear box shaft or at the motor end shaft.

Model Number: B6895

NX

The Hub with Brake Disc Type N + NX is appropriate for all drives, where the brake is not located between motor and gearbox, like brake installation on the second gear box shaft or at the motor end shaft.

Model Number: B7273

Model Number: VA000477

Model Number: B4417

Model Number: B6486

Model Number: B4417

Model Number: 20008948, 20008964

Model Number: B3445

Model Number: 20019107

Model Number: B6811

Model Number: B3408

Model Number: B7212

Model Number: B5499

SFB

For many years a seawaterproof version of the SFB series has been used successfully on winch motors in ship building and as a safety, service or holding brake in wharf crane installations.