DELLNER WIND SOLUTIONS

KH

KH

TKMAX:  62000 Nm

These couplings are for use in application with high dynamic loads. Damping of peak torques and vibrations as well as electrical insulation between motor and gearbox are further reasons for the use of this coupling type. The standard material of the elastic intermediate ring Polyurethane (Vulkollan) is suitable for a temperature range of -35˚C up to +80˚C. For a short time -40˚C up to +100˚C.

  • Steel coupling, torsionally elastic and bullet-proof (fail safe)
  • Torque transmission via elastic buffers
  • Buffer elements can be radially replaced by pushing back the retaining ring without moving any equipment
  • Elastic ring provides superb electrical insulating characteristics (e.g. prevents leaking currents)
  • Coupling hubs finish bored and keywayed acc. to DIN 6885
  • Coupling hubs unbored
  • Coupling hubs pilot bored
  • Coupling dynamically balanced according to ISO 21940 Grade: G 2.5; G 6.3
  • Coupling hubs in special lengths
  • Coupling hubs in special material
  • Test certificate DIN EN 10204-3.1

Additional PRODUCTS

Model Number: B4070

N

The Hub with Brake Disc Type N + NX is appropriate for all drives, where the brake is not located between motor and gearbox, like brake installation on the second gear box shaft or at the motor end shaft.

Model Number: B6895

NX

The Hub with Brake Disc Type N + NX is appropriate for all drives, where the brake is not located between motor and gearbox, like brake installation on the second gear box shaft or at the motor end shaft.

Model Number: B7273

Model Number: VA000477

Model Number: B4417

Model Number: B6486

Model Number: B4417

Model Number: 20008948, 20008964

Model Number: B3445

Model Number: 20019107

Model Number: B6811

Model Number: B3408

Model Number: B7212

Model Number: B5499

SFB

For many years a seawaterproof version of the SFB series has been used successfully on winch motors in ship building and as a safety, service or holding brake in wharf crane installations.