DELLNER WIND SOLUTIONS

JHS-YBP-1X80

JHS-YBP-1X80

A passive yaw sliding bearing with a robust yet simple design that guarantees optimum performance throughout the life of the turbine. As few components are needed, this bearing is reliable and virtually maintenance free, so there’s less need for outages or downtime. Brake torque is applied continuously and the system slides on the yaw bearing, so you don’t need an additional brake disc. The brake torque is mainly dependent on surface pressure and friction coefficient, so variations can be built in during the design process

  • Fully closed passive brake system
  • Special epoxy resin pads
  • Min / Max working temperature -40°C / + 60°C

Additional PRODUCTS

A hydraulic rotor lock offering up to 250 bar pressure with an activation time of 60 seconds.

We offer three models of the JHS-RLH-240 hydraulic rotor lock – the GL Type Certified JHS-RLH-240, the JHS-RLM-240 and the JHS-RLH-240-154. All these locks deliver up to 250 bar pressure with an activation time of just 35 seconds.

Manually activated rotor lock used for safety purposes during maintenance operations to stop the rotor mechanically. The maximum lateral force is 6400 N and the standard stroke is 95 mm. Other strokes are available upon request.

JHS WTC is a flexible disc coupling mounted between gearbox and generator. It's a tailor-made solution for wind turbine applications (Type WTC = Wind Turbine Coupling).

K

These couplings are for use in application with high dynamic loads. Damping of peak torques and vibrations as well as electrical insulation between motor and gearbox are further reasons for the use of this coupling type.

These couplings are for use in machinery where a torsionally rigid torque is required, especially on frequently varying loads and speeds.

KBT

These couplings are for use in machinery where a torsionally rigid torque is required, especially on frequently varying loads and speeds.

KFB

The KFB is a spring applied safety brake which is mainly used in gantry, trolley and hoisting application on harbour crane systems, in dynamic and static use at general industrial applications, in mechanical engineering, steel mills, coal mining or wind energy systems.

KH

These couplings are for use in application with high dynamic loads. Damping of peak torques and vibrations as well as electrical insulation between motor and gearbox are further reasons for the use of this coupling type.

KHD

These couplings are for use in application with high dynamic loads. Damping of peak torques and vibrations as well as electrical insulation between motor and gearbox are further reasons for the use of this coupling type.

KL

These couplings are for use in application with high dynamic loads. Damping of peak torques and vibrations as well as electrical insulation between motor and gearbox are further reasons for the use of this coupling type.

These couplings are for use in application with high dynamic loads. Damping of peak torques and vibrations as well as electrical insulation between motor and gearbox are further reasons for the use of this coupling type.

KST

These couplings are for use in application with high dynamic loads. Damping of peak torques and vibrations as well as electrical insulation between motor and gearbox are further reasons for the use of this coupling type.

Model Number: 8224328

Model Number: 20010872

Model Number: B6629

Model Number: B4994